Hi,
I defined a dd6400 vtl with lto8 drives and tapes. The backup works, but I see, that during a backup the tape seems to be mounted and dismounted for every single file. After a while, the "query volume" command shows, that the tape has been mountet more than 3000 times!!! The actlog is full of messages:
Do you have any idea what could be wrong or is this a normal behaviour of virtual tapes (what I doubt)?
Regards,
Dirk
I defined a dd6400 vtl with lto8 drives and tapes. The backup works, but I see, that during a backup the tape seems to be mounted and dismounted for every single file. After a while, the "query volume" command shows, that the tape has been mountet more than 3000 times!!! The actlog is full of messages:
03.04.24 09:52:45 | ANR0511I Session 12942 opened output volume A00000L8. (SESSION: 12942) |
03.04.24 09:52:45 | ANR0514I Session 12942 closed volume A00000L8. (SESSION: 12942) |
03.04.24 09:52:45 | ANR0511I Session 12942 opened output volume A00000L8. (SESSION: 12942) |
03.04.24 09:52:46 | ANR0514I Session 12942 closed volume A00000L8. (SESSION: 12942) |
03.04.24 09:52:46 | ANR0511I Session 12942 opened output volume A00000L8. (SESSION: 12942) |
03.04.24 09:52:46 | ANR0514I Session 12942 closed volume A00000L8. (SESSION: 12942) |
Regards,
Dirk