Thanks for the -- REPLY ALL -- response
I'll be filing this in my notes (for future reference).
--doon
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Justin
Piszcz
Sent: Wednesday, February 04, 2009 11:54 AM
To: ckstehman AT pepco DOT com
Cc: veritas-bu-bounces AT mailman.eng.auburn DOT edu;
Anil.Maurya AT sanofi-aventis DOT com; veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] What are steps to replace drive in ACSLS
enviornment ?
On Wed, 4 Feb 2009, ckstehman AT pepco DOT com wrote:
> I have documented some steps that may be helpful.
>
> If possible do this when no backups are running. You may need to
> de-activate all policies. This should give you a rough idea of the
> steps needed.
>
> Environment:
>
> STK SL8500 with LTO2 tape drives, controlled by ACSLS server running
> version 7.1. Netbackup 6.0 MP4, 5 or 6, 6.5 Windows Master and Media
Very nice instructions but IMO there is an easier method:
1. Allow Sun to replace the tape drive.
2. On media server, run /usr/openv/volmgr/bin/stopltid 3. On media
server, run /usr/openv/volmgr/bin/ltid 4. You will see
DRIVE:MISSING_SN######.
5. On media server, run /usr/openv/volmgr/bin/tpautoconf -replace_drive
Drive_Name.
6. It that does not work, delete the drive and re-add it, use the full
command line to add the drive and name it.
Example:
/usr/openv/volmgr/bin/tpconfig -update -robot 0 -drive 3 -robtype acs
-ACS 0 -LSM 2 -PANEL 1 -DRIVE 14 ; /usr/openv/volmgr/bin/tpconfig
-update -drive 3 -newasciiname Drive21
Justin.
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|