If I remember correctly:

You will need to put the following entries in the *servers* bp.conf
file:

SERVER=<PRIMARY INTERFACE HOSTNAME>
SERVER=<SECONDARY INTERFACE HOSTNAME>
SERVER=.....

Then in your *clients* bp.conf file add the entry to the server they
would connect to on that network.

If your clients also have vitual hosts then you will need to add for
each virtual host (inc primary host) in the *clients* bp.conf:

CLIENT_NAME=<PRIMARY HOST>
CLIENT_NAME=<VIRTUAL HOST>

etc

Hope this helps.

Timothy

> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu 
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of 
> Whelan, Patrick
> Sent: 07 February 2002 11:20
> To: Veritas-Bu (E-mail)
> Subject: [Veritas-bu] Multiple interface on the master server
> 
> 
> I have never run into this before. Can someone explain. If 
> the master server
> has multiple nic cards each connected to different networks 
> (of course) and
> there are many clients on each of these networks, what should 
> the first line
> (i.e. master server) say?
> 
> Patrick Whelan
> Commerzbank
> Frankfurt, Germany
> +49 136.40200
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 
>