Re: [Veritas-bu] Veritas-bu Digest, Vol 73, Issue 20

Sounds like the firewall (ipfilter ?) or tcpd (inetd) is blocking port 13782 from your master/media server(s). From your master, can you sucessfully telnet using port 13782, to the Solaris10 client ? You mention telnet from the master below, but just verifying that you used the bpcd port#.

/Steve
---

> Date: Mon, 28 May 2012 09:50:54 -0400
> From: SACHIN ARORA <sachinar1 AT gmail DOT com>
> Subject: [Veritas-bu] "cannot connect to socket"
> To: veritas-bu-request AT mailman.eng.auburn DOT edu,
> VERITAS-BU AT mailman.eng.auburn DOT edu
> Message-ID:
> <CANwqqMPwvdrmfTPiLB3J7JxvfT_fMGYrQB2i1ZefFkQJZcnjYA AT mail.gmail DOT com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi All
>
> Master server : Linux 2.6
> NBU version 7.1.0.2
>
> CLient : Solaris 10
> NBU version : 7.1.0.2
>
> Backup of client is getting incomplete with status 58
> .
> - Master and media server are pingable from client
> - bpclntcmd -pn works fine
> - Telnet from client to master/media server works fine
>
> When we run bptestbpcd from master/media server , it fails with "cannot
> connect to socket"
>
> bpcd logs on client side shows below msg :
>
> 05:26:43.458 [18377] <2> setup_debug_log: switched debug log file for bpcd
> 05:26:43.458 [18377] <2> bpcd main: VERBOSE = 0
> 05:26:43.458 [18377] <2> bpcd main: ParseArguments failed: 20
> 05:26:43.458 [18377] <16> bpcd main: EXIT status = 20
> 05:26:51.225 [18379] <2> setup_debug_log: switched debug log file for bpcd
> 05:26:51.225 [18379] <2> bpcd main: VERBOSE = 0
> 05:26:51.225 [18379] <2> logparams: ./bpcd -standalone
> 05:26:51.229 [18381] <2> unix_daemonize: No close(3) for DOOR file mode
> 0x0000d124
> 05:26:51.229 [18381] <2> setup_debug_log: switched debug log file for bpcd
> 05:26:56.229 [18381] <16> daemon_lock:
> ManageReadableLockFile(/usr/openv/var/vnetd/bpcd.lock) failed: -3
> 05:26:56.229 [18381] <16> bpcd main:
> daemon_lock(/usr/openv/var/vnetd/bpcd.lock) failed: 145
> 05:26:56.230 [18381] <16> bpcd main: EXIT status = 145
> 05:27:53.853 [18444] <2> setup_debug_log: switched debug log file for bpcd
> 05:27:53.853 [18444] <2> bpcd main: VERBOSE = 0
> 05:27:53.853 [18444] <2> logparams: ./bpcd -standalone
> 05:27:53.857 [18446] <2> unix_daemonize: No close(3) for DOOR file mode
> 0x0000d124
> 05:27:53.861 [18446] <2> setup_debug_log: switched debug log file for bpcd
> 05:27:58.861 [18446] <16> daemon_lock:
> ManageReadableLockFile(/usr/openv/var/vnetd/bpcd.lock) failed: -3
> 05:27:58.861 [18446] <16> bpcd main:
> daemon_lock(/usr/openv/var/vnetd/bpcd.lock) failed: 145
> 05:27:58.861 [18446] <16> bpcd main: EXIT status = 145
> can somebody help me fix this?
>
> Regards
> Sam

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu