[Veritas-bu] Backup Exec 11d with IBM 33614LX Tape Library
2007-05-30 17:13:27
I seem to be having a bit of a problem getting Backup Exec 11d to see my IBM
33614LX Robotic Library. We only have one drive in the unit. I am unable to
give the Robot a separate ID from the Tape drive. Every time I change the
drive ID, the host/robot ID changes with it. Currently my tape drive is ID 5
LUN 0 and the robot is ID 5, LUN 1. Backup Exec is not seeing the ID5, LUN 1
Any ideas on how to make these two play nice together? Any ideas as to how to
give the robot a separate ID from the tape drive?
+----------------------------------------------------------------------
|This was sent by KennyG944 AT yahoo DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Veritas-bu] Backup Exec 11d with IBM 33614LX Tape Library,
KennyG944 <=
|
|
|