Guys we are attaching a L500 via fiber to a Solaris box running Solaris8.
Got the latest SAN4.4.10 installed with all patches etc.
When we do a configure on c6 it does the tape drives but errors when it
comes to the robot itself.
We have had the HBA replaced, the GBIC on the switch replaced.
Storagetek have said the L500 is ok so im just stuck now. With it saying
i/o error it still makes me think hardware but i dont know what.
Other strange thing is i can see the wwn of the med changer but it wont
configure and therefore wont create the correct device paths on solaris.
Anyone any ideas?
root at host# cfgadm -al c6
Ap_Id Type Receptacle Occupant
Condition
c6 fc-fabric connected configured
unknown
c6::500104f00093fda2 med-changer connected configured
unknown
c6::500104f00093fdac tape connected configured
unknown
c6::500104f00093fdaf tape connected configured
unknown
c6::500104f00093fdb2 tape connected configured
unknown
c6::500104f00093fdb5 tape connected configured
unknown
root at host#
#Messages when try a cfgadm -c configure
root at host# cfgadm -c configure c6::500104f00093fda2
cfgadm: Library error: failed to create device node: 500104f00093fda2:
I/O error root at host#
root at host# cfgadm -c unconfigure c6::500104f00093fda2
cfgadm: Library error: remove operation failed:
/devices/pci at 1e,600000/SUNW,qlc at 4/fp at 0,0/sg at w500104f00093fda2,0: No
such
device or address
root at host#
# /var/adm/messages
Jan 25 15:29:01 host scsi: [ID 243001 kern.info]
/pci at 1e,600000/SUNW,qlc at 4/fp at 0,0 (fcp1):
Jan 25 15:29:01 host ndi_devi_online: failed for scsa,08.bfcp:
target=10a00 lun=0 ffffffff
Jan 25 15:29:01 host scsi: [ID 243001 kern.warning] WARNING:
/pci at 1e,600000/SUNW,qlc at 4/fp at 0,0 (fcp1):
Jan 25 15:29:01 host Failed to create nodes for
pwwn=500104f00093fda2; error=5
|