[Veritas-bu] Linux Media Server, Adic Library, and Drivers
2006-10-25 13:10:33
Subject: |
[Veritas-bu] Linux Media Server, Adic Library, and Drivers |
From: |
brooksje at longwood.edu (Brooks, Jason) |
Date: |
Wed, 25 Oct 2006 13:10:33 -0400 |
/proc/scsi/scsi only sees the local SCSI bus.
We're running RHEL3, kernel 2.4.21-40.EL with Qlogic 2300 driver
installed.
Zones look right, but not sure why drive isn't seen. The tape drive is
a straight FC connect - no backplane in the ADIC (Scalar i2K). The
server is a Dell with a Xeon, NBU 6.0 MP3, Qlogic 23xx.
Jason
> -----Original Message-----
> From: veritas-bu-bounces at mailman.eng.auburn.edu
> [mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf
> Of Peter DrakeUnderkoffler
> Sent: Wednesday, October 25, 2006 12:39 PM
> To: Brooks, Jason
> Cc: veritas-bu at mailman.eng.auburn.edu
> Subject: Re: [Veritas-bu] Linux Media Server, Adic Library,
> and Drivers
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> what do you see when you...
>
> cat /proc/scsi/scsi
>
> If it isn't there, then your O/S isn't seeing the drives,
> check your zones again. Also, are you using the included
> qlogic driver to the kernel (which distro and kernel are you
> using?) or have you installed the qlogic Linux drivers?
> There shouldn't be a "driver" for the LTO3 drives, it should
> be seen as a SCSI "st" device and the NBU install should set
> up the SG driver correctly.
>
> There are also great docs included with NBU for this.
> I would also help when asking questions to supply all the data needed:
>
> - -O/S version and architecture?
> - -NBU version and MP level?
> - -which qlogic cards?
>
> Thanks
> Peter
>
> Peter DrakeUnderkoffler
> Xinupro, LLC
> 617-834-2352
>
>
>
> Brooks, Jason wrote:
> > We're testing a Linux media server now to try and resolve some NDMP
> > issues. I have the Media server set up, talking to my
> Master, fiber
> > connectivity to a tape drive (properly zoned), but I can't find
> > drivers. I've contacted ADIC support, but they've been no
> help. I've
> > found IBM drivers (library contains IBM LTO3s), but they don't work
> > for fibre attached, just SCSI. The fibre attached drivers link to
> > Emulex, but we have QLogic cards.
> >
> > Now, I'm about at the end of my rope. Any suggestions? Contact
> > Veritas support? My last hope is to wait on my ADIC Sales
> Rep's Engineer.
> >
> > Thanks,
> > Jason
> >
> >
> >
> ----------------------------------------------------------------------
> > --
> >
> > _______________________________________________
> > Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.1 (FreeBSD)
>
> iD8DBQFFP5M1l+lekZRM55oRAgnWAJ427l9vIRPhqHCtWVJaVUfgwY7gNACeOmhd
> 2LeaZXnqQeRnzo7Q8UO+uvo=
> =onCD
> -----END PGP SIGNATURE-----
> _______________________________________________
> Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] Linux Media Server, Adic Library, and Drivers, Brooks, Jason
- [Veritas-bu] Linux Media Server, Adic Library, and Drivers, Len Boyle
- [Veritas-bu] Linux Media Server, Adic Library, and Drivers, Peter DrakeUnderkoffler
- [Veritas-bu] Linux Media Server, Adic Library, and Drivers,
Brooks, Jason <=
|
Previous by Date: |
[Veritas-bu] LTO3 Drivers - HP ESL, Dyck, Jonathan |
Next by Date: |
[Veritas-bu] Linux Media Server, Adic Library, and Drivers, Peter DrakeUnderkoffler |
Previous by Thread: |
[Veritas-bu] Linux Media Server, Adic Library, and Drivers, Peter DrakeUnderkoffler |
Next by Thread: |
[Veritas-bu] Linux Media Server, Adic Library, and Drivers, Peter DrakeUnderkoffler |
Indexes: |
[Date]
[Thread]
[Top]
[All Lists] |
|
|