Hi,
I think you can try vmdareq -a. This will show the status of all shared
drives per drive
BR,
Jim
_____
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of
Aaron.J.Morrison at nab.com.au
Sent: Wednesday, September 06, 2006 1:52 AM
To: nbu
Subject: [Veritas-bu] vmoprcmd in a NBU 6 SSO environment
Does anyone find vmoprcmd frustrating in an SSO environment?
Up until recently we have been using the StorageTek SN6000 to virtualise our
tape drives and so we haven't needed to worry about SSO. As this product is
end of life we're now begining to switch back to using SSO. In netbackup 6 I
am having to run vmoprcmd twice to get enough information to up down
tapedrives...
By the way, we run on Solaris Master and Media servers and the hostnames
below have been changed for security reasons. Our tape libraries are
controlled by ACSLS from StorageTek.
Here's an example below:
root at mediasvr2# vmoprcmd -d
PENDING REQUESTS
<NONE>
DRIVE STATUS
Drv Type Control User Label RecMID ExtMID Ready Wr.Enbl. ReqId
0 hcart3 ACS Yes T00975 T00975 Yes Yes 0
0 hcart3 ACS Yes T00975 T00975 Yes Yes 0
1 hcart3 ACS No T00967 Yes Yes 0
1 hcart3 ACS No T00967 Yes Yes 0
2 hcart3 ACS Yes T00468 T00468 Yes Yes 0
2 hcart3 ACS Yes T00468 T00468 Yes Yes 0
3 hcart3 DOWN-ACS - No - 0
3 hcart3 DOWN-ACS - No - 0
ADDITIONAL DRIVE STATUS
Drv DriveName Shared Assigned Comment
0 T10K_3_3_1_1 Yes mediasvr1.domain
0 T10K_3_3_1_1 Yes mediasvr1.domain
1 T10K_3_3_1_0 Yes mediasvr2.domain
1 T10K_3_3_1_0 Yes mediasvr2.domain
2 T10K_2_3_1_0 Yes mediasvr2.domain
2 T10K_2_3_1_0 Yes mediasvr2.domain
3 T10K_2_3_1_1 Yes -
3 T10K_2_3_1_1 Yes -
root at mediasvr2#
root at mediasvr2#
root at mediasvr2# vmoprcmd
HOST STATUS
Host Name Version Host Status
========================================= ======= ===========
nbumaster2 600000 ACTIVE-DISK
nbumaster 600000 ACTIVE-DISK
mediasvr1 600000 ACTIVE
mediasvr2 600000 ACTIVE
PENDING REQUESTS
<NONE>
DRIVE STATUS
Drive Name Label Ready RecMID ExtMID Wr.Enbl. Type
Host DrivePath Status
============================================================================
=
T10K_2_3_1_0 Yes Yes T00468 T00468 Yes hcart3
mediasvr2 /dev/rmt/0cbn ACTIVE
mediasvr1 /dev/rmt/3cbn ACS
T10K_2_3_1_1 No No No hcart3
mediasvr2 /dev/rmt/1cbn DOWN-ACS
mediasvr1 /dev/rmt/2cbn DOWN-ACS
T10K_3_3_1_0 No Yes T00967 Yes hcart3
mediasvr2 /dev/rmt/3cbn ACTIVE
mediasvr1 /dev/rmt/1cbn ACS
T10K_3_3_1_1 Yes Yes T00975 T00975 Yes hcart3
mediasvr2 /dev/rmt/2cbn ACS
mediasvr1 /dev/rmt/0cbn ACTIVE
root at mediasvr2# vmoprcmd -d -up 3
root at mediasvr2# vmoprcmd -d -up 3 -h mediasvr1
In the above example for each physical drive, the drive index is the same
but on one of the other environments one of the media servers has it's drive
indexes different so both commands need to be run to work out which host has
which drive down by drive index. I am thinking of wrapping a perl script
around vmoprcmd to combine the two to give more useful output.
Has anyone done something like this already?
regards,
Aaron
_____
Aaron Morrison
Senior Technical Specalist
Storage Management
National Australia Bank
1/122 Lewis Rd Wantirna South 3152
Tel: (+61 3) 9886 2359 Mob: 0400104744
Fax: (+61 3) 98862700 email: <mailto:aaron_morrison at nab.com.au>
aaron_morrison at nab.com.au
_____
Please contact <mailto:storage_management_australia at national.com.au>
Storage Management Australia for all requests.
National Australia Bank Ltd - ABN 12 004 044 937
This email may contain confidential information. If you are not the intended
recipient, please immediately notify us at postmaster at nab.com.au or by
replying to the sender, and then destroy all copies of this email. Except
where this email indicates otherwise, views expressed in this email are
those of the sender and not of National Australia Bank Ltd. Advice in this
email does not take account of your objectives, financial situation, or
needs. It is important for you to consider these matters and, if the e-mail
refers to a product(s), you should read the relevant Product Disclosure
Statement(s)/other disclosure document(s) before making any decisions. If
you do not want email marketing from us in future, forward this email with
"unsubscribe" in the subject line to Unsubscriptions at nab.com.au in order to
stop marketing emails from this sender. National Australia Bank Ltd does not
represent that this email is free of errors, viruses or interference.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060922/6d5d82d7/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3873 bytes
Desc: not available
Url :
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060922/6d5d82d7/attachment-0001.jpeg
|