Carlos
Thank you. If I am doing this wrong, tell me but...
>From the NBU GUI Window, expand Media & Device Management
Next, expand ROBOTS
In the right side window, it shows the drives. There are also 3 TABS at the
bottom (Drives, Robots, HOSTS)
I assume, I right click on the right side, click NEW which then brings up
the ADD DRIVE Window.
Does this sound right :-)
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B23AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: <mailto:Simon.Weaver at Astrium-eads.net> Simon.Weaver at
Astrium-eads.net
-----Original Message-----
From: Carlos Alberto Lima dos santos [mailto:carlos_listas at yahoo.com.br]
Sent: 27 July 2006 16:14
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] RES: RES: NBU 5.1 MP2 adding additional 2 drives
Hi Simon,
By GUI you click on the robot with the rigth mouse button and chose new
drive, then you fill out the informations about the new tape drive. After
this you need to change the Storage Unit adding the new drive.
To test if the configuration was OK you can use the robtest utility
(CLI) move a tape of a slot to new tape drive and moves to slot again.
T+
Carlos Alberto Lima dos Santos
Eng. Computa??o - Jundia? SP-BR
* <mailto:carlos_listas at yahoo.com.br> carlos_listas at yahoo.com.br
H https://www.linkedin.com/in/carlostoca
<https://www.linkedin.com/in/carlostoca>
icq 123987362 - skype carlostoca
msn only carlos_alberto_toca at hotmail.com
_____
De: WEAVER, Simon [mailto:simon.weaver at astrium.eads.net]
Enviada em: quinta-feira, 27 de julho de 2006 11:16
Para: 'Carlos Alberto Lima dos santos'; veritas-bu at mailman.eng.auburn.edu
Assunto: RE: [Veritas-bu] RES: NBU 5.1 MP2 adding additional 2 drives
Carlos
What is the best way to do it manually my friend?
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B23AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: <mailto:Simon.Weaver at Astrium-eads.net> Simon.Weaver at
Astrium-eads.net
-----Original Message-----
From: Carlos Alberto Lima dos santos [mailto:carlos_listas at yahoo.com.br]
Sent: 27 July 2006 13:33
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] RES: NBU 5.1 MP2 adding additional 2 drives
The easiest way is use the wizard, but particularly I prefer todo
manually.
T+
Carlos Alberto Lima dos Santos
Eng. Computa??o - Jundia? SP-BR
* <mailto:carlos_listas at yahoo.com.br> carlos_listas at yahoo.com.br
H https://www.linkedin.com/in/carlostoca
<https://www.linkedin.com/in/carlostoca>
icq 123987362 - skype carlostoca
msn only carlos_alberto_toca at hotmail.com
_____
De: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] Em nome de WEAVER, Simon
Enviada em: quarta-feira, 26 de julho de 2006 05:13
Para: veritas-bu at mailman.eng.auburn.edu
Assunto: [Veritas-bu] NBU 5.1 MP2 adding additional 2 drives
Guys
NBU 5.1 Win2k3 SP1 with MP2 for NBU + many multipe SAN Servers using SSO
I have added 2 additional tape drives in the robotic library. the Robot can
see them.
In terms of just ADDING 2 additional drives, what is the EASIEST method to
do this?
Also, what about sharing them? would it just be the same as sharing the
drives using a wizard?
Thanks
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: <mailto:Simon.Weaver at Astrium-eads.net> Simon.Weaver at
Astrium-eads.net
This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate
or otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of Astrium
Limited.
Nothing in this email shall bind Astrium Limited in any contract or
obligation.
Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
England
This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate
or otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of Astrium
Limited.
Nothing in this email shall bind Astrium Limited in any contract or
obligation.
Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
England
This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate or
otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of Astrium
Limited.
Nothing in this email shall bind Astrium Limited in any contract or obligation.
Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060728/ad423a4c/attachment-0001.html
|
