> Message: 1
> Date: Fri, 02 Jun 2006 16:45:13 -0400
> From: Peter Vines <psv2b at virginia.edu>
> Subject: [Veritas-bu] Netbackup 6.0 MP2 and ADIC i2000 tape library
> To: veritas-bu at mailman.eng.auburn.edu
> Message-ID: <redirect-205241690 at cgatepro-4.mail.virginia.edu>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> We need assistance installing NBU on a Solaris 10 V210 server, fiber attached
> via a Brocade switch to a ADIC i2000 tape library.
>
> The i2000 is partitioned, allocating 1 LTO3 drive and 6 tape slots to this
> server. I have issues opened with SUN (for Veritas support) and ADIC. Both
> are pondering the situation, meanwhile the clock is ticking...
>
> The NBU install wizard finds the drive but not the robot.
>
> sgscan shows:
>
> # /usr/openv/volmgr/bin/sgscan -v all
> /dev/sg/c0t0l0: Disk (/dev/rdsk/c0t0d0): "HITACHI HUS10733ASUN72G PA05"
> /dev/sg/c0t1l0: Disk (/dev/rdsk/c0t1d0): "HITACHI HUS10733ASUN72G PA05"
> /dev/sg/c0tw500308c001899804l0: Array-controller: "ADIC Scalar i2000
> 4461"
> /dev/sg/c0tw500308c001899804l1: Tape (/dev/rmt/0): "IBM ULTRIUM-TD3
> 5482"
>
> cfgadm shows:
>
> c3 fc-fabric connected configured unknown
> c3::500308c001899804 array-ctrl connected configured unknown
>
> /var/adm/messages shows: (lines that seem to pertain to this)
>
> Jun 2 15:04:23 mustang qlc: [ID 171021 kern.info] Qlogic FCA Driver
> v20050104-1.58 (0)
> Jun 2 15:04:23 mustang qlc: [ID 637753 kern.info] NOTICE: qlc(0): Firmware
> version 3.2.112
> Jun 2 15:04:23 mustang qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(0):
> Link ONLINE
> Jun 2 15:04:23 mustang pcisch: [ID 370704 kern.info] PCI-device: SUNW,qlc at
> 1, qlc0
> Jun 2 15:04:23 mustang genunix: [ID 936769 kern.info] qlc0 is /pci at
> 1d,700000/SUNW,qlc at 1
> Jun 2 15:04:24 mustang genunix: [ID 936769 kern.info] fp0 is /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0
> Jun 2 15:04:24 mustang scsi: [ID 799468 kern.info] sgen0 at fp0: name
> w500308c001899804,2, bus address 10c00
> Jun 2 15:04:24 mustang genunix: [ID 936769 kern.info] sgen0 is /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0/sgen at w500308c001899804,2
> Jun 2 15:04:24 mustang genunix: [ID 408114 kern.info] /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0/sgen at w500308c001899804,2 (sgen0) online
> Jun 2 15:04:24 mustang scsi: [ID 365881 kern.info] /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0/st at w500308c001899804,1 (st37):
> Jun 2 15:04:24 mustang <Vendor 'IBM ' Product 'ULTRIUM-TD3 '>
> Jun 2 15:04:24 mustang scsi: [ID 799468 kern.info] st37 at fp0: name
> w500308c001899804,1, bus address 10c00
> Jun 2 15:04:24 mustang genunix: [ID 936769 kern.info] st37 is /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0/st at w500308c001899804,1
> Jun 2 15:04:24 mustang genunix: [ID 408114 kern.info] /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0/st at w500308c001899804,1 (st37) online
> Jun 2 15:04:24 mustang scsi: [ID 243001 kern.info] /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0 (fcp0):
> Jun 2 15:04:24 mustang ndi_devi_online: failed for array-controller:
> target=10c00 lun=0 ffffffff
>
>
> Jun 2 15:06:52 mustang scsi: [ID 799468 kern.info] sgen0 at fp0: name
> w500308c001899804,2, bus address 10c00
> Jun 2 15:06:52 mustang genunix: [ID 936769 kern.info] sgen0 is /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0/sgen at w500308c001899804,2
> Jun 2 15:06:53 mustang pseudo: [ID 129642 kern.info] pseudo-device: winlock0
> Jun 2 15:06:53 mustang genunix: [ID 936769 kern.info] winlock0 is
> /pseudo/winlock at 0
> Jun 2 15:06:53 mustang scsi: [ID 365881 kern.info] /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0/st at w500308c001899804,1 (st37):
> Jun 2 15:06:53 mustang <Vendor 'IBM ' Product 'ULTRIUM-TD3 '>
> Jun 2 15:06:53 mustang scsi: [ID 799468 kern.info] st37 at fp0: name
> w500308c001899804,1, bus address 10c00
> Jun 2 15:06:53 mustang genunix: [ID 936769 kern.info] st37 is /pci at
> 1d,700000/SUNW,qlc at 1/fp at 0,0/st at w500308c001899804,1
>
> Any and all thoughts are greatly appreciated.
>
>
Thanks for the list for helping solve my problem.
I changed the LUN Mapping for the server so it now only has mapped the tape
drive and partition.
LUN External LUN Internal LUN
0 6 NetBackup 0 Control LUN
1 5 Fibre - 6 1 Logical Library 01
2 Fibre - 3
3 Fibre - 4
4 Fibre - 5
Previously, the Control LUN was mapped to LUN 0, and the partition "6
NetBackup" was mapped to LUN 2.
sgscan now shows the changed instead of the array-controller:
/dev/sg/c0tw500308c001899804l0: Changer: "ADIC Scalar i2000 300A"
/dev/sg/c0tw500308c001899804l1: Tape (/dev/rmt/0): "IBM ULTRIUM-TD3
5482"
NBU now sees the robot and single tape drive, and backs up successfully.
--
Peter Vines : (434) 924-4644
University of Virginia : ITC
|