Use same name, install SW on secondary box with same setup, run
bprecover, be on your way.

On 5/10/06, WEAVER, Simon <simon.weaver AT astrium.eads DOT net> wrote:
>
> Dave
> What do you do?? Recover to an alternative Server or recover to a different
> name?
> Is there a documented process?
>
> Regards
>
> Simon Weaver
> 3rd Line Technical Support
> Windows Domain Administrator
>
> EADS Astrium Limited, B32AA IM (DCS)
> Anchorage Road, Portsmouth, PO3 5PU
>
> Email: Simon.Weaver AT Astrium-eads DOT net
>
>
>
> -----Original Message-----
> From: Dave Markham [mailto:dave.markham AT fjserv DOT net]
> Sent: 09 May 2006 11:00
> To: WEAVER, Simon
> Cc: 'Kathy Falakfarsa'; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: Re: [Veritas-bu] Export and Import NetBackup configuration
>
>
> It is exactly what i do for a DR process. Only caveat is need to have the
> hostname of the backup server to be the same as its embedded into the
> catalogue and with different host names i couldnt get the robot and certain
> things to work correctly.
>
> Cheers
>
> WEAVER, Simon wrote:
> > */Hi/*
> > */what I understand is, if you use have a Catalog Backup Tape, you can
> > use BPRECOVER onto the new Server, providing the Server name is
> > correct./*
> > *//*
> > */There is an unofficial method to recovering the data to a different
> > server, but not sure if you want to go down this route, and I do not
> > know if Symantec would like it!/*
> > *//*
> > */but I hear it is possible from their consultants..../*
> >
> >
> >
> > /Regards/
> >
> > /Simon Weaver
> > *3rd Line Technical Support
> > Windows Domain Administrator*/
> >
> > /EADS Astrium Limited, B32AA IM (DCS)/
> > /Anchorage Road, Portsmouth, PO3 5PU/
> >
> > /Email: //Simon.Weaver AT Astrium-eads DOT net/
> > <mailto:Simon.Weaver AT Astrium-eads DOT net>
> >
> >     -----Original Message-----
> >     *From:* Kathy Falakfarsa [mailto:KFalakfarsa AT Buchanan DOT com]
> >     *Sent:* 05 May 2006 19:49
> >     *To:* veritas-bu AT mailman.eng.auburn DOT edu
> >     *Subject:* [Veritas-bu] Export and Import NetBackup configuration
> >
> >     Hello,
> >
> >
> >
> >     Does anyone know, if I can Export the NetBackup configuration from
> >     an existing NetBackup server and Import it to a new server on
> >     another site?
> >
> >
> >
> >
> >
> >     NetBackup: 5.0 with MP2
> >
> >     OS: Windows 2003 Ent. SP1
> >
> >
> >
> >     Thanks
> >
> >
> >
> > This email is for the intended addressee only.
> > If you have received it in error then you must not use, retain,
> > disseminate or otherwise deal with it. Please notify the sender by
> > return email. The views of the author may not necessarily constitute
> > the views of EADS Astrium Limited.
> > Nothing in this email shall bind EADS Astrium Limited in any contract
> > or obligation.
> >
> > EADS Astrium Limited, Registered in England and Wales No. 2449259
> > Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1
> > 2AS, England
> >
>
> This email is for the intended addressee only.
> If you have received it in error then you must not use, retain, disseminate 
> or otherwise deal with it.
> Please notify the sender by return email.
> The views of the author may not necessarily constitute the views of EADS 
> Astrium Limited.
> Nothing in this email shall bind EADS Astrium Limited in any contract or 
> obligation.
>
> EADS Astrium Limited, Registered in England and Wales No. 2449259
> Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, 
> England
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>