Any idea then on how to do this? 


 
Greg
 
 

-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of David Rock
Sent: Wednesday, November 16, 2005 2:28 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: SV: [Veritas-bu] Through put question

* Christian S?nder <CHRS AT tdc DOT dk> [2005-11-16 15:18]:
> I use :
>  
> /usr/openv/netbackup/bin/admincmd/bpimagelist -client clientname 
> -hoursago 168 -U
>  
> to get amount of data - substiture -U with -L and grep for Elapsed - 
> it's the time in seconds
>  
> now u got throughput :)

You have to be careful doing it this way. It will give you the overall
time it took to do the backup, but that is not necessarily the
throughput. It is possible for the job to stay queued for several hours
before it starts writing data which will make the throughput seem low.
You need to look at the elapsed time _while the job is active_.

--
David Rock
david AT graniteweb DOT com
>>> This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are intended solely for the
addressee.  If you are not the intended recipient, do not use the information
in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP2