Veritas-bu

[Veritas-bu] NetApp NDMP over SAN

2004-11-11 14:41:09
Subject: [Veritas-bu] NetApp NDMP over SAN
From: Sto Rage© <netbacker AT gmail DOT com> (Sto Rage© )
Date: Thu, 11 Nov 2004 11:41:09 -0800
We have something similar, but note that...
Veritas doesn't support SSO on NDMP drives, you will have to dedicate
the tape drives exclusively to the Netapp. So why connect via the
switch?
We have it this way,
 R150-->STK SN3250-->2 drives on STK L700 (LTO-1)
hope this helps
-G


On Thu, 11 Nov 2004 11:17:26 -0700, bryan_bahnmiller AT agilent DOT com
<bryan_bahnmiller AT agilent DOT com> wrote:
> All,
> 
>  We are looking at bringing a NetApp FAS270 into our tape SAN. Our current 
> tape SAN has Windows and HPUX hosts connected through an EMC Connectrix ED64M 
> (McData 6064) to ADIC Pathlights to IBM LTO1 drives in a Scalar 10K.
> 
>  NetApp states that:
> 
> FAS270 --> Brocade --> Pathlight --> LTO drives (in a 10K)
> and
> FAS270 --> McData --> Scalar I2K
> 
> are both certified.
> 
>  Has anyone done this with the EMC re-badged McData?
> FAS270 --> EMC 64M --> Pathlight --> LTO drives (in a 10K)
> 
>  We will try it as soon as we get a loaner FAS270 in, but I am curious if 
> anyone else has done this before.
> 
>  Thanks,
>  Bryan
> 
> Bryan Bahnmiller
> Agilent Technologies
> Colorado Springs, CO
> bryan_bahnmiller AT agilent DOT com
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>

<Prev in Thread] Current Thread [Next in Thread>