I've got a messed up netbackup configuration and can't seem to even
address the tape library properly.  I'm a newbie, trying to understand but
I'm overwhelmed. I've been searching and searching the archives and have
been able to find some info but I can't be sure if I'm on the right track.

 1. I've got to do this all from the command line. I don't have access to
the GUI as I'm doing this remotely.

 2. For every backup I try to execute, either scheduled or manual, I get a
"no storage units available for use (213)" error.

 bpperror lists.

 1094084620 1 4 4 oradev 0 0 0 *NULL* bpsched cleaning job DB
1094084621 1 4 16 oradev 0 0 0 *NULL* bpsched scheduler exiting - no
storage units available for use (213)
1094085220 1 4 4 oradev 0 0 0 *NULL* bpsched cleaning job DB
1094085221 1 4 16 oradev 0 0 0 *NULL* bpsched scheduler exiting - no
storage units available for use (213)
1094085820 1 4 4 oradev 0 0 0 *NULL* bpsched cleaning job DB
1094085821 1 4 16 oradev 0 0 0 *NULL* bpsched scheduler exiting - no
storage units available for use (213)
1094086421 1 4 4 oradev 0 0 0 *NULL* bpsched cleaning job DB
1094086421 1 4 16 oradev 0 0 0 *NULL* bpsched scheduler exiting - no
storage units available for use (213)

 2.  output from tpautoconf -show is different from tpconfig -dl

 oradev# tpautoconf -show

HP      ThinStor AutoLdrH33r /dev/sg/c1t5l0
   Drive 1:    - Not locally connected or robot not serialized.

Standalone or unserialized drives, or robot not locally connected:
oradev# tpconfig -dl
Currently defined drives and robots are:

        Drive Name              HPUltrium1-SCSI0
        Index                   0
        NonRewindDrivePath      /dev/rmt/0cbn
        Type                    hcart
        Status                  DOWN
        Shared Access           No
        TLD(0) Definition       DRIVE=1

Currently defined robotics are:
  TLD(0)     robotic path = /dev/sg/c1t5l0,
             volume database host = oradev

 sgscan shows

oradev# sgscan -v
/dev/sg/c0t0l0: Disk (/dev/rdsk/c0t0d0): "FUJITSU MAP3367NC       0106"
/dev/sg/c0t1l0: Disk (/dev/rdsk/c0t1d0): "FUJITSU MAP3367NC       0106"
/dev/sg/c0t6l0: Cdrom: "TEAC    CD-ROM CD-532S  1.0A"
/dev/sg/c1t4l0: Tape (/dev/rmt/0): "HP      Ultrium 1-SCSI  E00P"
/dev/sg/c1t5l0: Changer: "HP      ThinStor AutoLdrH33r"


 robtest allows me to contact the tape library and move tapes so I know
that I am contacting the library but I just can't seem to get netbackup to
see it and use it.

 How can I get my tape library configuration straight so that I can start
accessing it properly??

 Thanks for the help, I'm at my wits end,

 Miles D. Oliver