[Veritas-bu] Drives useable; not recognized

Ryan, look at your /kernel/drv/sg.conf file.  The upgrade process seems to
replace the 3.2 versions of /usr/openv/volmgr/bin/driver/sg.conf and
sg.links which only have entries covering targets 0-6 with luns 0 and 1.
The upgrade then runs sg.install using these new files.  sgscan seems to be
complaining about drives with targets above 6. 


-mike

-----Original Message-----
From: RYAN ANDERSON [mailto:RYAN_ANDERSON AT udlp DOT com]
Sent: Wednesday, May 23, 2001 4:05 PM
To: Veritas NBU
Subject: [Veritas-bu] Drives useable; not recognized


In upgrading NetBackup from 3.2 to 3.4 on Solaris 2.6 there was a part
where the install script discovered only 6 of our 10 DLT7K drives. After
the upgrade, I had to readd in the 4 drives with SCSI ids over 7 via
tpconfig. 

Since then the drives have worked fine and are useable by Media Manager.
However, doing a simple sgscan doesn't see them, and upon restarting
NetBackup I get these messages:

avrd[562]: Unable to find sg device
/devices/pci@6,4000/scsi@3/sg@8,0:raw, using open() for scanning
avrd[562]: Unable to find sg device
/devices/pci@6,4000/scsi@3/sg@9,0:raw, using open() for scanning
avrd[562]: Unable to find sg device
/devices/pci@6,4000/scsi@4/sg@a,0:raw, using open() for scanning
avrd[562]: Unable to find sg device
/devices/pci@6,4000/scsi@4/sg@b,0:raw, using open() for scanning


The only discrepancy I find is that it appears from the output of the
undocumented command 'vmglob -listall' that the drives it doesn't
initially recognize don't have serial numbers listed. 

What is the workaround to have my DLT drives recognized?


Thanks,

RCA
--
Ryan Anderson          | United Defense L.P.
ryan_anderson AT udlp DOT com | pager 763.572.6684
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu