[Networker] HP-UX multiple Interfaces with same IP subnet
2008-06-25 06:49:41
I have a network configuration problem with HP-UX B.11.23 ia64. I want to use 2
physical nics with IP addresses in the same IP subnet. I don't want to use
teaming but the "Server network interface" feature from networker.
With one nic it works as expected, but with 2 nics i loose the complete network
connection. If i configure the routing only for lan0 it works also, but lan1 is
only reachable on the local subnet.
INTERFACE_NAME[0]=lan0
IP_ADDRESS[0]=192.168.1.1
SUBNET_MASK[0]=255.255.255.0
BROADCAST_ADDRESS[0]=""
INTERFACE_STATE[0]=""
DHCP_ENABLE[0]=0
INTERFACE_MODULES[0]=""
INTERFACE_NAME[1]=lan1
IP_ADDRESS[1]=192.168.1.2
SUBNET_MASK[1]=255.255.255.0
BROADCAST_ADDRESS[1]=""
INTERFACE_STATE[1]=""
DHCP_ENABLE[1]=0
INTERFACE_MODULES[1]=""
ROUTE_DESTINATION[0]=default
ROUTE_MASK[0]=""
ROUTE_GATEWAY[0]=192.168.1.254
ROUTE_COUNT[0]=1
ROUTE_ARGS[0]=""
ROUTE_DESTINATION[1]=default
ROUTE_MASK[1]=""
ROUTE_GATEWAY[1]=192.168.1.254
ROUTE_COUNT[1]=2
ROUTE_ARGS[1]=""
With linux and windows this works without problems. Any hints for HP-UX?
Birk Bohne
Backup and Virtualization Consulting
Erfurt, Germany
mobile: +49 151 20470983
email: birk.bohne AT batchworks DOT de
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] HP-UX multiple Interfaces with same IP subnet,
Birk Bohne <=
|
|
|