Networker
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Networker] Adding a Superloader3

2008-03-12 06:02:20
Subject: Re: [Networker] Adding a Superloader3
From: Lars Hecking <lqh AT CYPRESS DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Wed, 12 Mar 2008 09:57:24 +0000 
Nico De Ranter writes:
> It's an LTO2 but I'm not sure which brand actually. I'll see whether I
> can find anything there. Thanks.
 
 Mine's a

# cat /proc/scsi/scsi 
Attached devices: 
Host: scsi0 Channel: 00 Id: 05 Lun: 00
  Vendor: CERTANCE Model: ULTRIUM 2        Rev: 1914
  Type:   Sequential-Access                ANSI SCSI revision: 03

 half-height. This is under Linux.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Networker] Adding a Superloader3, Nico De Ranter
Next by Date:  Re: [Networker] Limit on number of savesets in an nsrclone?, Ian G Batten
Previous by Thread:  Re: [Networker] Adding a Superloader3, Nico De Ranter
Next by Thread:  Re: [Networker] Adding a Superloader3, Davina Treiber
Indexes:  [Date] [Thread] [Top] [All Lists]