One more thing to think about - you should be able to get some temporary
enablers from your reseller if you need to keep both environments up and
functioning during the transition.

We've done this process too and it was a great way to get some clean-up
done as well as upgrading the environment.

Good luck.
Teresa



-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Randy Doering
Sent: Tuesday, March 04, 2008 2:00 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Upgrading Networker & moving to a new server

Some good suggestions in there. Another way to do it, if you are moving
to a new tape library as well, is how we did this a couple of years ago.
Forget about upgrading anything. Just retire/shutdown your old server
and start from scratch on the new platform. You'll need to get your
enablers transferred, but that shouldn't be much.

Once you get the new environment setup, just don't bring both the old
and the new online at the same time, or they will disable themselves.

Worked well for us as the old equipment was going back at the end of the
lease, and we had plenty of time to get the new environment in place
well before the old retentions were reached.

Randy



----- Original Message ----
From: Steve Harris <steve AT COMP.LEEDS.AC DOT UK>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Sent: Tuesday, March 4, 2008 6:11:58 AM
Subject: [Networker] Upgrading Networker & moving to a new server

Morning all,

We are running Networker Server version 6.x on an old, but maintained, 
server and now wish to move to new hardware and upgrade to Networker
7.4.

I am thinking we need to upgrade to 7.4 on the old server before
transferring to the new hardware, but have a few questions:

  . should we be able to get an enabler to go straight from 6.x to 7.4
    or is it advisable to go through stages. (We have been on
maintenance
    throughout but currently only have the enablers to 7.1)

  . I have read somewhere that do not need an enabler to move to new
    server hardware if you are maintaining the same hostname and IP
    address, is this the case?

  . Is it possible to restore the client indexes if the server
    architecture is changing, or do the tapes need to be re-scanned
    using scanner?
    (We have successfully tested recovery of the media data from a
    backup created using 'savegrp -O')

Please no flaming about running a old versions of Networker. One has 
to fix the broken before getting to fix the working but old!

Many thanks for any advice

Steve

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER