Networker

Re: [Networker] Powersnap Module with EMC Clariion

2006-08-30 15:41:13
Subject: Re: [Networker] Powersnap Module with EMC Clariion
From: "Stewart, Kathy" <Kathy.Stewart AT RODALE DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Wed, 30 Aug 2006 15:26:49 -0400
Has anyone done this upgrade?  I was told that I also needed to install
"Solutions Enabler - SymAPI" and a SYmAPI license which is available
free of charge from 'Powerlink' website.

I've had so many problems with Legato and it took 18 months to get it
stable - I don't want to mess it up.

Kathy
 

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Steve Warren
Sent: Wednesday, August 30, 2006 1:31 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Powersnap Module with EMC Clariion

PowerSnap is at 2.2.1, recently released, you might want to consider
upgrading.

-----Original Message-----
From: Stewart, Kathy [mailto:Kathy.Stewart AT RODALE DOT COM]
Sent: Wednesday, August 30, 2006 11:45 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Powersnap Module with EMC Clariion

 
We had a flarecode upgrade done to our EMC Clariion on Sunday night and
now the SNAPs are failing (see log below).  Has anyone else had this
issue?  I am running Networker 7.21 and Powersnap 2.0.1. EMC Software
and Legato support are working on this, but have not found an answer
yet.

Thanks,
Kathy Stewart
Security Analyst
Rodale, Inc.
400 S. Tenth Street
Emmaus, PA  18098
610-967-8876
kathy.stewart AT rodale DOT com


NetWorker savegroup: (alert) SNAP completed, total 1 client(s), 0
Hostname(s) Unresolved, 1 Failed, 0 Succeeded. (venus Failed)
Start time:   Wed Aug 30 11:04:44 2006
End time:     Wed Aug 30 11:12:43 2006

--- Unsuccessful Save Sets ---

* venus F:\: Preparing...
* venus F:\: Requesting snapshot...
* venus F:\: Saving...
* venus G:\: Preparing...
* venus G:\: Requesting snapshot...
* venus G:\: Saving...
* venus G:\: Failed.
* venus G:\: Error :Monitor Internal Error: import operation returned an
error F:\ G:\ Internal Error in Monitor: while Getting the status of
snapshots One of the critical components of powersnap [Snapshot Monitor]
is not available Failed to find the status of G:\
nsrsnap_save: Backup Failed.
nsrsnap_save: Backup operation failed.

--- Successful Save Sets ---

  pluto2.rodale.com: index:venus    level=9,      5661 MB 00:05:56
69 files

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>