[Networker] Networker does not work on 1st tape drive bay empty in jukebox
2003-09-11 10:16:50
Hi,
this is not question but an observation and an advise:
We use Networker 6.1.2/Solaris 8 and an Exabyte 215M tape library with 2 tape
drives in 2 bays.
Tape drive in bay #1 became defective - I removed it and insertet a service
cover in the now empty bay.
The tape library itself continued to function well, but now came senseless
*Networker* error messages the like:
nsrjb: Jukebox error: Thu 10:06:48 cannot find usable cleaning slot for drive
`/Dev/Jb1-2'.
nsrjb: Jukebox error: Thu 10:06:59 The destination CTS is not installed
Reconfiguring jukebox with deleting missing drive did not help, but
finally solution found:
Move tape drive from bay #2 to bay #1 and all works well from then on!
I've not found any indication, that *Networker* does not like an empty 1st
tape drive bay (but 2nd one occupied) on a tape library.
Comments are welcome.
Yours,
Harald
--
Harald A. Irmer
ATIS - Abteilung Technische Infrastruktur
University of Karlsruhe EMail: Harald.Irmer AT atis.uni-karlsruhe DOT
de
Faculty of Computer Science WWW : http://atiswww.ira.uka.de
Building 50.34 Room-No. 006
Am Fasanengarten 5 Fon : +49 (721) 608-6963
D-76131 Karlsruhe / Germany Fax : +49 (721) 608-6699
----------------------------------------------------------
This mail was sent through ATIS: http://www.atis.uka.de
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Networker] Networker does not work on 1st tape drive bay empty in jukebox,
Harald Irmer <=
|
|
|