Hi all!
Specifying saveset All on NT4 MSCS work the way you
expected (only backing up "local" drives on physical
nodes and only "virtual" drives on virtual node).
Don't know if it's a bug or a re-design on Win2k
MSCS...
// Matts
--- "Rohrich, James" <rohrich AT UOP DOT COM> skrev: > In
6.x the saveset has to specifiy the volumes
> otherwise you will have
> problems with the virtual hosts. Additonally as was
> my experience it will
> keep doing fulls on the virtual hosts until the
> drive is specidfied. Wish
> this were not the case.
>
> -----Original Message-----
> From: Izzet Ergas
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Sent: 10/10/02 9:09 AM
> Subject: Re: [Networker] Microsoft Cluster backup
> problem
>
> Perhaps I misunderstand Networker's capabilities.
>
> I created node1, node2, vnode1 & vnode2 like you
> described. Then I put
> "All"
> in the saveset field for each. I expect Legato to
> figure out that node1
> is a
> physical node and automatically figure out which
> volumes are private to
> that
> node and backup only those private volumes for
> node1. Same for the
> others.
>
> I'd prefer to avoid having to specify volumes in the
> saveset field. That
> way
> when new volumes are added to the server I don't
> have to worry about the
> admin forgetting to update the saveset field.
>
> Am I incorrect in my understanding of Networker's
> cluster support?
>
> -----Original Message-----
> From: Clemens Zerbe [mailto:ClemensZ AT TIM DOT DE]
> Sent: Thursday, October 10, 2002 3:25 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: AW: [Networker] Microsoft Cluster backup
> problem
>
>
> Hi,
>
> if i configure a ms cluster with legato i do it this
> way:
>
> node1: saveset lokal devices like c: d: and system
> state and so on
> node2: saveset lokal devices like c: d: and system
> state and so on
> vnode1: virtuell devices like s:
> vnode2: virtuell devices like t:
>
> on this way and with the additionell w2k patch all
> works normaly fine
>
> Regards
> Clemens
>
> -----Ursprüngliche Nachricht-----
> Von: Izzet Ergas [mailto:izzet.ergas AT CITRIX DOT COM]
> Gesendet: Donnerstag, 10. Oktober 2002 00:23
> An: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Betreff: Re: [Networker] Microsoft Cluster backup
> problem
>
>
> I should have mentioned that I already have this
> hotfix installed over
> W2K
> SP2. I also tried a workaround from Hrvoje Crvelin
> which was to put the
> physical & virtual IPs into the local hosts file
> which also didn't work.
>
> -----Original Message-----
> From: Wes Ono [mailto:wono AT legato DOT com]
> Sent: Wednesday, October 09, 2002 5:08 PM
> To: 'Legato NetWorker discussion'; 'Izzet Ergas'
> Subject: RE: [Networker] Microsoft Cluster backup
> problem
>
>
>
> There is a bug in the gethostbyname/gethostbyaddr
> calls in a MSCS
> environment.
>
> Win2K SP3 includes the fix. Win2K SP2 and earlier
> have a hotfix
> available
> from Microsoft - Q265017.
>
> Wes
>
> -----Original Message-----
> From: Izzet Ergas [ mailto:izzet.ergas AT CITRIX DOT COM
> <mailto:izzet.ergas AT CITRIX DOT COM> ]
> Sent: Wednesday, October 09, 2002 3:27 PM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Microsoft Cluster backup
> problem
>
>
> Server: Tru64 5.0A with Networker 6.0.3
> Client: 2 node Windows 2000 Adv Svr SP2 MSCS cluster
> with Networker
> 6.1.2
>
> Cluster consists of two physical nodes: node1 &
> node2
> and two virtual nodes: virtual1 & virtual2
>
> node1 has 3 private (non-clustered) volumes: C:, D:
> & E:
> node2 has same
>
> one of the shared volumes, S:, is assigned to
> virtual1 and
> the other shared volume, T:, is assigned to virtual2
>
> virtual1 & virtual2 both reside on node1
>
> I've setup networker clients for node1, node2,
> virtual1 & virtual2 with
> "All" as the saveset.
>
> From my reading of the manual I expect to have node1
> & node2 both backup
> C:,
>
> D:, E: & SYSTEM STATE: and virtual1 backup S: and
> virtual2 backup T:.
>
> Instead node1 backs up C:, D:, E: AND S:, T:. Even
> worse virtual1 backs
> up
> all of the same volumes.
>
> It looks like Networker can't distinguish between
> private and shared
> volumes. Can anyone help?
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> <http://listmail.temple.edu/archives/networker.html>
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
=== message truncated ===
_____________________________________________________
Gratis e-mail resten av livet på www.yahoo.se/mail
Busenkelt!
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|