Re: [Networker] Licensing problems with library

I've got this exact same library here. Unfortunately I haven't gotten
it hooked up to my server yet. I've read through the user's guide and
have a few ideas as to what might work.

1) Are you sure that the auto-clean setting doesn't work on the
   expansion unit. I just went to my library and set auto-clean on
   the expansion unit. Since I don't have it hooked up to my server
   I can't verify what Networker sees, but the library let me set it.

2) If you can, try moving one of the drives to the expansion unit. This
   may allow you to turn on auto-clean on both units if the above
   doesn't work. The tape drives can be installed in any unit in
   any order.

3) Set the import/export option on the expansion unit to 1-Slot, see
   page 71 of the user's guide. This will cause the library to use
   the front slot of the left magazine as a load port, lowering your
   total slot count. You could do this on both units if you don't want
   to use auto-clean. This should get you down to 40 slots I think.

Hope this helps,
Mike

> I have a new library, a M1500 with a M1500 as an extension. So what I
> bought is a 40 Slot Library with 2 SDLT drives.
> Additinaly I bought a 40 slots license from legato. But that doesn´t work.
> Every M1500 has a fixed slot that is not in any magazine it is fix in the
> library. So the NetWorker thinks the library has 42 slots.
> A nsrjb -Vv shows that the Library reports 42 slots.
> When I am searching for that Library on the compability list I see that it
> is supported.
> My distributer told me that there is no 42 slots license available.
> Then I configured one cleaning slot at one M1500 an the nsrjb -vV reports
> 41 slots.
> On the other M1500 extension I can´t configure a cleaning slot because the
> two drives are in one M1500. The technicion who installed me that library
> told me that there is no other option to install.
> Anybody had this problem before?
>
> TIA
> Stefan
--
Michael Golub                              Raytheon Technical Services
System Administrator(ConITS/GIS/CIPO)      NASA Langley Research Center
m.s.golub AT larc.nasa DOT gov                    Mail Stop 445, B1209T8 rm 809
voice:(757)864-4128  fax:(757)864-8463     Hampton, VA 23681-0001

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=