Re: [Bacula-users] ProblemsstartingBacula aftercompilingandinstalling
2009-01-22 03:06:58
Subject: |
Re: [Bacula-users] ProblemsstartingBacula aftercompilingandinstalling |
From: |
Bruno Friedmann <bruno AT ioda-net DOT ch> |
Date: |
Thu, 22 Jan 2009 09:04:05 +0100 |
Reynier Perez Mira wrote:
>> With what you indicate it would be reasonable to launch the same flags I use.
>> I've several quite identical pc running same spec with this compilation.
>> ( ok on opensuse, not debian but this would normaly doesn't change a lot. )
>
> Thanks a lot Bruno, I compile with those CFLAGS and now I ran Bacula without
> problems.
>
>> If the compil works, try to start each daemon at the beginning with some
>> debug flags -d99 in foreground just to ensure you
>> doesn't have crashes ...
>
> It works but what you mean with crashes? Bacula now start fine I just need to
> configure my clients and jobs and try some to see if it works fine.
>
> Cheers
> Ing. Reynier Pérez Mira
> Dirección Técnica IP
As we use certain gcc flags, there always a risk (minimal is this case) to use
the one to much optimization.
But what I've give to you is what standard distribution use and what the rpm
are build.
--
Bruno Friedmann
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|