Re: Define LTO Drives
2003-05-12 14:14:18
The officially supported method is to use IBM LTO driver for drives and
TSM driver for library changer/robot. Therefore it is reasonable why you
get these results.
Are not you happy with current state?
Zlatko Krastev
IT Consultant
Christian Astuni <astunich AT HOTMAIL DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
12.05.2003 14:37
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Define LTO Drives
Hi ... TSM'ers
I have a question ... to defining LTO drives.
I have a TSM 5.1.6.4 over Windows 2000. And I'm using a library LTO 3583
with two drives 3580.
I had problems when I want to define this drives using TSM Device drives.
This is the error:
05/05/2003 15:54:02 ANR2017I Administrator TCZQUP issued command: DEFINE
PATH sartsm1 LTO1 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=TCSLI-
B2C DEVICE=MT0.2.0.5 ONLINE=YES
05/05/2003 15:54:02 ANR8779E Unable to open drive MT0.2.0.5, error
number=2.
05/05/2003 15:54:02 ANR8420E DEFINE PATH: An I/O error occurred while
accessing drive LTO1.
If I define the same drives, but using the Windows 2000 drivers I dont
have
problmes, and I can define ok. My quetions is there are any method to
define
the 3580 using the drivers of TSM ???? What is the methods ???
Thank's in advance
Best regards
Christian Astuni
_________________________________________________________________
Charla con tus amigos en lmnea mediante MSN Messenger:
http://messenger.yupimsn.com/
|
|
|