Re: Drive Mapping in TSM SAN
2001-10-26 14:27:58
You can check to see if your drive mapping is correct by mounting a tape in
the drive and executing the following from your shell.
tar -tvf /dev/rmtx
If it returns a block size error, or even gives you a list of files, your
mapping is correct. If it times out with a "not ready" type of message,
mapping may not be correct or maybe the drive just isn't talking.
Good luck.
Alex Paschal
Storage Administrator
Freightliner, LLC
(503) 745-6850 phone/vmail
|
|
|