Pls see my comments below.
Freddy Sjauw-En-Wa
Seagate Software
>-----Original Message-----
>From: Boireau, Eric (MED-Cap Gemini) [SMTP:BOIREER AT EUROMSX.GEMSE DOT FR]
>Sent: Friday, February 06, 1998 1:56 PM
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Re: ADSM-Exchange
>
>Michele,
>To backup our 4 Exchange Server, we use BackupExec V7.0 with the ADSM
>Module. The ADSM Server appears as a virtual autoloader on BackupExec.
>There is some restriction :
>- For the moment only one BackupExec Server can be connected to the same
>ADSM Server. I have tried one to connect two BE Server to the ADSM
>server is not realy easy. It is not yet implemented by Seagate Software.
>[Freddy Sjauw-En-Wa] It is possible by using a different nodename, which
>you can edit.
>- It's better to define specific storage pool for BackupExec node, than
>using BACKUPPOOL (Default). You have a ADSM Macro for defining the
>BackupExec Node on the ADSM Server. [Freddy Sjauw-En-Wa] It makes no
>difference what pool the data goes to, ADSM will keep track of the object
>that are sent through. As long as you make sure that the primary target is of
>the diskclass.
>- I have to keep all tape of the BackupExec's primary storage pool is
>autoloader. If not, backup may hangs. BackupExec mount a tape before
>begining backup (Time may very long 20Min). [Freddy Sjauw-En-Wa] This
>doesn't sound like a known issue when using the option of Seagate. Do you
>have a primary dest. on HD and then migrate to tape, or do you write directly
>to tape?
>- Due to all this restriction, be careful with the size of your
>autoloader. In our case, with a 2 week retention time in Backup Exec. I
>have, after a Full Backup, 3xFull Backup + 2 week of Incrementals. We
>have a small autoloader (Exabyte 210 10x8MM), some days I have 7 to 8 on
>10 tapes for BackupExec. We have planned to change of autoloader.
>[Freddy Sjauw-En-Wa] This could be a result of sending data (VT) directly to
>tape.Pls let me know.
>I hope this help you
>Eric Boireau
>
>
>
>
>> ----------
>> From: Usiak, Michele[SMTP:MUsiak AT caiso DOT com]
>> Sent: mercredi 4 février 1998 16:26
>> To: Boireau, Eric (MED-Cap Gemini)
>> Subject: RE: ADSM-Exchange
>>
>> Eric,
>>
>> Can you provide me with more information?
>>
>> Thanks,
>>
>> Michele Usiak
>> mailto:musiak AT caiso DOT com
>>
>> > -----Original Message-----
>> > From: Boireau, Eric (MED-Cap Gemini)
>> [SMTP:BOIREER AT EUROMSX.GEMSE DOT FR]
>> > Sent: Thursday, January 29, 1998 1:28 AM
>> > To: ADSM-L AT VM.MARIST DOT EDU
>> > Subject: Re: ADSM-Exchange
>> >
>> > Hello,
>> > The best way to backup Exchange Server with ADSM , is to used
>> Seagate
>> > Software BackupExec with the ADSM Module. This module emulate the
>> ADSM
>> > server as a virtual autoloader.
>> >
>> > I can send you more information.
>> >
>> > > g GE Medical Systems
>> > > __________________________________
>> > > Eric Boireau GITS
>> > > Unix / NT System Engineer
>> > >
>> > > GE Medical Systems S.A
>> > > 283, rue de la Minière
>> > > 78533 BUC Cedex France
>> > > Tél: (33) 01 30 70 39 51, DC: 8*644 3951
>> > > Fax: (33) 01 30 70 39 20, DC: 8*644 3920
>> > > mailto:boireer AT euromsx.gemse DOT fr
>> > >
>> > > Salutations / Best Regards
>> > >
>> > >
>> > >
>> > > ----------
>> > > From: christian lombard[SMTP:clomb AT club-internet DOT fr]
>> > > Reply To: clomb AT club-internet DOT fr
>> > > Sent: jeudi 29 janvier 1998 08:08
>> > > To: ADSM-L AT VM.MARIST DOT EDU
>> > > Subject: ADSM-Exchange
>> > >
>> > > Hi,
>> > >
>> > > My goal is to backup Microsoft Exchange on server ADSM V.3.1.
>> > >
>> > > How can I do it ?
>> > > What are the needs ?
>> > >
>> > > Thanks
>> > >
>>
|